|
Post by Bill F on Nov 25, 2015 15:09:17 GMT -4
Anybody making Landing Gear Blocks? I need one for the Page 80" Cub.
Size is shown on the attached picture.
Bill Attachments:
|
|
|
Post by steve on Nov 25, 2015 19:55:57 GMT -4
I can make you one from Oak BILL, 434-0556
|
|
|
Post by Bill F on Nov 25, 2015 20:33:33 GMT -4
I'll call you Steve, thanks!
Bill
|
|
daver
Members
Posts: 2,268
|
Post by daver on Nov 25, 2015 22:19:00 GMT -4
Think I've got piles of made up ones from kits that I've installed retracts in.
|
|
|
Post by Bill F on Nov 26, 2015 14:51:21 GMT -4
Thanks Dave, hang on to them, at least until Spring..!
Steve is going to make me one. Was surprised that the kit instructions make NO mention of the actual gear installation, but do mention the triangular covers for the gear legs.
Bill
|
|
|
Post by coyote on Nov 26, 2015 15:12:09 GMT -4
Steve -
Can you do +1 as I also have same kit? There's a bottle of wine in it for you ;-)
|
|
daver
Members
Posts: 2,268
|
Post by daver on Nov 26, 2015 22:22:07 GMT -4
Um guys, I'm pretty sure I've got a truckload, that would just require drilling the two vertical holes. Not to mention you can laminate your own in about 5 minutes!
|
|
|
Post by coyote on Nov 26, 2015 22:54:06 GMT -4
LOL! I thought you were going to use them on your trailer.
|
|
daver
Members
Posts: 2,268
|
Post by daver on Nov 27, 2015 19:30:13 GMT -4
Not so much. They'll just end up as kindling, otherwise.
|
|
|
Post by steve on Nov 28, 2015 13:49:25 GMT -4
Bill and Marc, check your mailboxes.....literally the ones near your front door
|
|
|
Post by Bill F on Nov 28, 2015 19:29:09 GMT -4
Thanks again Steve, working on putting it in tonight. Bit of engineering involved to spread the load, in the event of a "hard landing" as described by Air Canada.
Bill
("check your mailboxes...'cause Santa Claus came today..!")
|
|
|
Post by coyote on Dec 2, 2015 14:06:24 GMT -4
Boy....not only was it quick.....but that was stealth delivery!!! Never even knew you were there ;-) You sure you don't have special ops background?
|
|