rob
Instructor
Posts: 207
|
Post by rob on Apr 19, 2015 13:50:36 GMT -4
Put together the Viggen that Brian gave me, and I believe Dave cut the foam. Ready to go once the ground softens up enough to land it.
|
|
daver
Members
Posts: 2,268
|
Post by daver on Apr 19, 2015 16:17:26 GMT -4
All the foam was cut by Dennis, the master foam cutter. I only attempted a couple of pieces. Love to see it fly!
|
|
|
Post by Bill F on Apr 19, 2015 16:53:40 GMT -4
Looks good Rob....Dennis is a master foam cutter alright!
I hope it flys as well or better than the Viggen that the Flitetest boys have produced from flat foamboard. Chris D had his out today at Shannon with a big ole 4S-3300mah 40C lipo pack and it performed very well.
You would think that a pack this size would be too heavy, but no sir..! On one occasion when I was the launcher, Chris open the throttle and pulled the thing right out of my hands. So there is no sag at all upon launching..! Not sure which 70mm fan and motor he was using.
Bill
|
|
rob
Instructor
Posts: 207
|
Post by rob on Apr 19, 2015 17:59:32 GMT -4
I was planning to use a 4S 2200mAh, seems to work for the CG, that and a bit of lead in the back.
|
|
|
Post by Dennis on Apr 19, 2015 19:27:02 GMT -4
Glad to see another one of these , mine is no longer. Looks great Rob, you will love it, especially with 4cell . What fan unit did you use? Dennis
|
|
rob
Instructor
Posts: 207
|
Post by rob on Apr 20, 2015 18:48:38 GMT -4
I think it's one that came out of my T50 as I put a metal EDF in it this winter. With a Turnigy 3000kv motor. Nice job on the foam cutting Dennis, it looks great.
|
|
|
Post by coyote on Apr 24, 2015 19:12:57 GMT -4
Nice job!!!
|
|