|
Post by coyote on May 12, 2013 22:21:32 GMT -4
Could you use wellbond rather than CA for the cloth and center wing piece?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2013 5:29:46 GMT -4
You have a weldbond fetish! I won't say no, cause I've never tried it. I'd use water based varnish myself, no smell, easy clean up. I've got lots if you need a bit.
|
|
|
Post by krmckay "Bombs away" on May 13, 2013 19:56:24 GMT -4
Well here's the completed Wing (up to this point) and the start on the fuse. I've only seen a couple errors in the instructions that have sent me off on a wild goose chase. A couple of the instructions haven't had enough detail but after thinking about it for a few seconds I was able to figure it out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2013 21:18:05 GMT -4
I think your fuse is upside down, and wings might be sideways. . . . .
|
|
|
Post by krmckay "Bombs away" on May 14, 2013 5:05:41 GMT -4
Excellent....nothing wrong with your eyes. !!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2013 6:32:17 GMT -4
Just my brain!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2013 16:47:58 GMT -4
Is it done yet? ?
|
|
|
Post by krmckay "Bombs away" on May 14, 2013 16:50:19 GMT -4
Do you want it done right or fast ....you can't have both!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2013 17:08:08 GMT -4
Ok. Do it right. Is it done yet??? lol (ducking)
|
|
|
Post by krmckay "Bombs away" on May 16, 2013 20:04:25 GMT -4
Well the fuse is moving along just nicely.
|
|
glen
Instructor
Posts: 647
|
Post by glen on May 16, 2013 20:06:25 GMT -4
Is it done yet ? ;D
|
|
|
Post by krmckay "Bombs away" on May 17, 2013 5:05:52 GMT -4
Talk to Dave !!
|
|
|
Post by jfennell on May 17, 2013 9:21:37 GMT -4
That plane will never fly, just look at all the holes in. Besides there isn't any place for the two left wings.
|
|
|
Post by coyote on May 17, 2013 10:14:12 GMT -4
there isn't any place for the two left wings. Two left wings? Is it a Bi-plane??? I thought is was a Decathlon? PS: We only tease those we love ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2013 12:39:26 GMT -4
Least the fuse is right side up.
|
|
|
Post by krmckay "Bombs away" on May 17, 2013 19:12:07 GMT -4
Well it pays to be precise when building. Tonight I drilled the wing dowel holes into the fuse and checked the squareness of the wing to find out the wing is out only 1/32" from perfectly square to the fuse. You can't beat that (right Dave)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2013 19:59:02 GMT -4
The Egyptians did, when they build the Pyramids. . . . . . lol Good work.
|
|
|
Post by krmckay "Bombs away" on May 23, 2013 19:24:09 GMT -4
Wing mounted and the Hortz Stab glued Yesterday. Tonight the Vert Stab glue is hardening. Measured several times and checked again and still found a boo boo as I was applying the epoxy and quickly had to make an adjustment before the epoxy began to set. Thank god I used 15 min instead of the 5 min epoxy.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2013 20:17:33 GMT -4
Is it done???
|
|
|
Post by krmckay "Bombs away" on May 23, 2013 20:33:51 GMT -4
Is what done??? Oh course you can't rush perfection !! ;D ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 24, 2013 6:16:13 GMT -4
True! lol It's looking good. Ready for some formation aerobatics with my Decathelon?
|
|
glen
Instructor
Posts: 647
|
Post by glen on May 24, 2013 17:26:59 GMT -4
Is it done yet ? ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 24, 2013 17:37:40 GMT -4
Group evilness is way better than individual evil.
|
|
glen
Instructor
Posts: 647
|
Post by glen on May 24, 2013 18:51:20 GMT -4
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 25, 2013 12:35:19 GMT -4
Your Decathelon should be almost identical to Wayne's, grab his and you have a complete spare airframe!
|
|